{"id":148977,"date":"2026-09-17T23:57:16","date_gmt":"2026-09-17T21:57:16","guid":{"rendered":"https:\/\/sdcverifier.com\/?post_type=whats_new&p=148977"},"modified":"2026-09-18T00:02:09","modified_gmt":"2026-09-17T22:02:09","slug":"sdc-verifier-2026-r2","status":"publish","type":"whats_new","link":"https:\/\/sdcverifier.com\/es\/software\/sdc-verifier\/whats-new\/sdc-verifier-2026-r2\/","title":{"rendered":"SDC Verifier 2026 R2"},"content":{"rendered":"\n\n
\n

New Standards <\/h3><\/div>
\n

BV NR526 Plate Buckling (2026)<\/span><\/b>\u00a0<\/span><\/p>\n

Enables plate buckling verification for lifting appliances onboard ships and offshore units in accordance with BV NR526 (January 2026), Chapter 2, Appendix 4.<\/span>\u00a0<\/span><\/p>\n

\"\"<\/span><\/p>\n

AS 4100 Members (2020) \u2013 Update<\/span><\/b>\u00a0<\/span><\/p>\n

Expands member design and verification according to AS 4100 (2020) with support for T-Sections and equal-leg Angle sections, covering tension, compression, bending, shear, and combined actions.<\/span>\u00a0<\/span><\/p>\n

\"\"<\/span><\/p>\n

API RP 2A-LRFD Connections (2nd, 2019)<\/span><\/b>\u00a0<\/span><\/p>\n

Enables tubular connection verification according to API RP 2A-LRFD (2nd, 2019), Chapter 14, supporting offshore structural design and assessment.<\/span>\u00a0<\/span><\/p>\n

\"\"<\/span><\/p>\n

ISO 19902 Connections (2nd, 2020)<\/span><\/b>\u00a0<\/span><\/p>\n

Enables tubular joint verification according to ISO 19902 (2nd, 2020), Chapter 14, supporting the design and assessment of offshore structures.<\/span>\u00a0<\/span><\/p>\n

\"\"<\/span><\/p>\n

Combined Flat and Curved Plate Buckling Standards<\/span><\/b>\u00a0<\/span><\/p>\n

Enables buckling verification of models containing both flat and curved plates by combining DNV RP-C201 Plate\/Stiffener\/Girder Buckling (2023) and DNV RP-C202 Curved Plate Buckling (2019).<\/span>\u00a0<\/span><\/p>\n

\"\"<\/p>\n\n\n <\/div>\n<\/div>\n\n\n\n

\n

New features in SDC Verifier <\/h3><\/div>
\n

Compatibility<\/span><\/b>\u00a0<\/span><\/p>\n

    \n
  • Now compatible with Simcenter 3D 2606 and Femap 2606.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

    3D View in SDC for Ansys<\/span><\/b>\u00a0<\/span><\/p>\n

      \n
    • Introduces 3D View support in SDC for Ansys, providing improved performance and visualization when working with SDC Criteria and Contour Plots for load and check results. The first iteration is available as a BETA feature.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

      \"Screenshot<\/p>\n

      New Standards Tab on Ribbon<\/span><\/b>\u00a0<\/span><\/p>\n

        \n
      • Improved Standards Search and Organization<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
          \n
        • Standards are now organized by check type and can be searched by name, industry, year, country, or check type, making it easier to find the required standard.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

          \"SDC<\/span><\/p>\n

          Multiaxial Fatigue Tool<\/span><\/b>\u00a0<\/span><\/p>\n

            \n
          • Provides the data required for multiaxial fatigue assessment according to DNV RP-C203 Fatigue (October 2024), Chapter 5.6.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

            \"Screenshot<\/p>\n

            Brace Stress Tool \u2013 Plastic Buckling Stress<\/span><\/b>\u00a0<\/span><\/p>\n

              \n
            • Added Plastic and Elastic Buckling Stress calculations to the Brace Stress Tool. Both stress types can now be used in supported standards.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

              \"Screenshot<\/p>\n

              No-Solver SDC Verifier<\/span><\/b>\u00a0<\/span><\/p>\n

                \n
              • SDC Verifier can now provide modelling, model reading, verification, post-processing, and reporting capabilities without requiring an analysis solver.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                Recognition Tools in Report Designer<\/span><\/b>\u00a0<\/span><\/p>\n

                  \n
                • Added Beam Section Finder, Connection Finder, and Joint Finder to Report Designer, providing access to essential recognition data directly in reports.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                  \"Screenshot<\/p>\n

                  Weld Finder \u2013 Naming and Sorting<\/span><\/b>\u00a0<\/span><\/p>\n

                    \n
                  • Improved Weld Finder with support for renaming multiple welds, easier selection, and improved sorting. The Weld and Weld Parts tables have also been redesigned to provide more relevant information.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                    \"Screenshot<\/p>\n

                    Views for Peak Finder Plots<\/span><\/b>\u00a0<\/span><\/p>\n

                      \n
                    • Peak Finder can now be used with Views, preserving camera position, model styles, and other view settings for more consistent result visualization.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                      New Project<\/span><\/b>\u00a0<\/span><\/p>\n

                        \n
                      • Simplified project creation by automatically synchronizing engineer information from the user account, reducing manual data entry.<\/span><\/li>\n<\/ul>\n

                        \"Screenshot\u00a0<\/span><\/p>\n

                        Undo and Redo<\/span><\/b>\u00a0<\/span><\/p>\n

                          \n
                        • Added Undo and Redo commands to the SDC Verifier toolbar for easier editing and navigation.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                          \"SDC<\/p>\n

                          Auto-Launch After Installation<\/span><\/b>\u00a0<\/span><\/p>\n

                            \n
                          • SDC Verifier can now be launched automatically after installation, providing immediate access to the application.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n\n\n <\/div>\n<\/div>\n\n\n\n
                            \n

                            Improvements <\/h3><\/div>
                            \n

                            Connection Standards<\/span><\/b>
                            \n<\/span> Updated ISO, API, and Norsok Connection standards to support Plastic Buckling Stresses..<\/span>\u00a0<\/span><\/p>\n

                            Fatigue Check Performance<\/span><\/b>
                            \n<\/span> Improved the performance of building the Expand Table for Fatigue Checks..<\/span>\u00a0<\/span><\/p>\n

                            Joint Check<\/span><\/b>
                            \n<\/span> Improved handling of the Overlap condition in the Joint Check table..<\/span>\u00a0<\/span><\/p>\n

                            AIJ Standard Naming<\/span><\/b>
                            \n<\/span> Renamed the existing AIJ (2005 Edition, 2017) standard to AIJ Members (2005 Edition, 2017) for better consistency with other standards..<\/span>\u00a0<\/span><\/p>\n

                            Background Processing<\/span><\/b>
                            \n<\/span> Improved SDC Verifier responsiveness by allowing background logging while other windows are open..<\/span>\u00a0<\/span><\/p>\n

                            Model Views in Report Designer<\/span><\/b>
                            \n<\/span> Views selected through Apply to Selected can now be used for Model Plots in Report Designer.<\/span>\u00a0<\/span><\/p>\n

                            SDC for Ansys \u2013 Solver-Free Plotting<\/span><\/b>
                            \n<\/span> SDC for Ansys can now generate plots without requiring a solved solution in Mechanical.<\/span>\u00a0<\/span><\/p>\n

                            Panel Finder \u2013 Girder Recognition<\/span><\/b>
                            \n<\/span> Added support for predefined girders modelled with plate elements, allowing them to be included in Panel Finder settings and plate recognition.<\/span>\u00a0<\/span><\/p>\n

                            Plate and Cross-Section Thickness Display<\/span><\/b>
                            \n<\/span> Simplified thickness display in SDC Verifier by returning to a single option for Plates and Cross-Sections.<\/span>\u00a0<\/span><\/p>\n

                            Effective Plate Width \u2013 Unit System<\/span><\/b>
                            \n<\/span> All values in the Effective Plate Width Tool are now displayed using the selected Display Unit System.<\/span>\u00a0<\/span><\/p>\n\n\n <\/div>\n<\/div>\n\n\n\n

                            \n

                            Bug fixes <\/h3><\/div>
                            \n

                            Stability & Crashes<\/span><\/b>\u00a0<\/span><\/p>\n

                              \n
                            • Fixed a crash when creating Eurocode 3 Members (EN 1993-1-1, 2005) for models containing Rod properties.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                \n
                              • Fixed a crash in SDC Verifier after importing .fil files.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                  \n
                                • Fixed an issue where the Main Form failed to initialize.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                    \n
                                  • Fixed a soft lock in Presentation.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                      \n
                                    • Fixed a crash in Panel Finder after recognizing edited plates.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                                      \u00a0<\/span><\/p>\n

                                      Usability<\/span><\/b>\u00a0<\/span><\/p>\n

                                        \n
                                      • Fixed Pick Zone Table not appearing on the taskbar.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                          \n
                                        • Fixed Weld Check Flow Table not appearing under Checks.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                            \n
                                          • Fixed number formatting for Labels in Criteria Plot.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                              \n
                                            • Added automatic minimization of Report Designer when selecting items from the Property Grid.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                \n
                                              • Fixed visibility of Properties in SDC Verifier.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                  \n
                                                • Fixed visibility of plate thicknesses from the toolbar.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                    \n
                                                  • Fixed the tooltip for NACA TN 3781 Plate Buckling (1957).<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                      \n
                                                    • Fixed SDC Verifier locking during Autosave.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                        \n
                                                      • Fixed the progress bar becoming stuck during Save As.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                          \n
                                                        • Fixed incorrect Geometry updates in the SDC Verifier Tree.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                            \n
                                                          • Fixed empty selection after adding Wind Drag Coefficients for Components and Materials.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                              \n
                                                            • Fixed an issue with opening internal windows for the first time.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                \n
                                                              • Fixed license module expiration check in SDC.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                  \n
                                                                • Fixed Empty selection on Wind Drag Coefficients.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                    \n
                                                                  • Fixed Arrows are not displayed in Wind\/Wave load in Ansys.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                                                                    \u00a0<\/span><\/p>\n

                                                                    Calculation Fixes & Standards Correctness<\/span><\/b>\u00a0<\/span><\/p>\n

                                                                      \n
                                                                    • Corrected Eurocode 3 Members formulas for Bending and Axial Utilisation Factors.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                        \n
                                                                      • Improved the Uf_Biaxial calculation by adding comparisons with individual results and using the maximum of all three values as the output.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                          \n
                                                                        • Corrected formulas for piles in API RP 2A-WSD.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                            \n
                                                                          • Fixed division-by-zero errors for beam members with Lambda < 60.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                              \n
                                                                            • Corrected Eurocode 3 Members formulas for RHS sections.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                \n
                                                                              • Fixed swapped Ty and Tz values for RHS sections.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                  \n
                                                                                • Corrected the section modulus formula in API RP 2A-LRFD Connections (1st, 1993).<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                    \n
                                                                                  • Fixed the Bending and Axial checks in Eurocode 3 Members (EN 1993-1-1, 2005).<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                      \n
                                                                                    • Fixed error on editing Check in the SDC for Femap embed mode.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                        \n
                                                                                      • Fixed messages in Component\/Material\/Property Plotter for \u201cLabel Top-Vertical offset\u201c and \u201cLabels per Row\u201d fields.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                                                                                        \u00a0<\/span><\/p>\n

                                                                                        Report Designer<\/span><\/b>\u00a0<\/span><\/p>\n

                                                                                          \n
                                                                                        • Fixed the Page Break Before setting changing from \u201cYes\u201d to \u201cNo\u201d after editing a plot.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                            \n
                                                                                          • Fixed Peak Finder losing its selection and automatically switching to all entities.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                              \n
                                                                                            • Fixed the user-defined power value category is not reflected in the report tables in Ansys<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                \n
                                                                                              • Fixed incorrect tree configuration in the report after adding multiple Jobs Load Content.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                                                                                                \u00a0<\/span><\/p>\n

                                                                                                Results & Data Handling<\/span><\/b>\u00a0<\/span><\/p>\n

                                                                                                  \n
                                                                                                • Fixed reading results from Ansys using DPF.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                    \n
                                                                                                  • Corrected Hot Spot Stress calculations for Solid Elements.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                      \n
                                                                                                    • Fixed result reading for Cable and Link elements in SDC for Ansys.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                        \n
                                                                                                      • Fixed Time Step handling for Transient Analysis plots in SDC for Ansys.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                          \n
                                                                                                        • Fixed GP Forces result reading for models containing only Solid Elements.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                            \n
                                                                                                          • Fixed Top and Bottom result plotting in SDC for Simcenter 3D.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                              \n
                                                                                                            • Fixed Wind Load result handling in SDC for Ansys when a comma is used as the decimal separator.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                                \n
                                                                                                              • Fixed incorrect element type recognition for Abaqus models imported into Simcenter 3D.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                                  \n
                                                                                                                • Fixed Check corruption after deleting a Parameter.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n

                                                                                                                  \u00a0<\/span><\/p>\n

                                                                                                                  Recognition<\/span><\/b>\u00a0<\/span><\/p>\n

                                                                                                                    \n
                                                                                                                  • Fixed incorrect Csys determination in Weld Summation Tool for certain models.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                                      \n
                                                                                                                    • Fixed incorrect gap calculations between braces in connection checks.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                                        \n
                                                                                                                      • Fixed recognition of duplicated elements in Connection Finder.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                                          \n
                                                                                                                        • Fixed incorrect behavior in Panel Finder after recognizing edited plates.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n
                                                                                                                            \n
                                                                                                                          • Fixed plotting of Plate-Beam, Plate 2Dy, and Plate 2Dz connections in Joint Finder.<\/span>\u00a0<\/span><\/li>\n<\/ul>\n\n\n <\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"","protected":false},"featured_media":148931,"template":"","meta":{"_acf_changed":true,"inline_featured_image":false},"versions":[743,345],"class_list":["post-148977","whats_new","type-whats_new","status-publish","has-post-thumbnail","hentry","versions-743","versions-current-version"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/sdcverifier.com\/es\/wp-json\/wp\/v2\/whats_new\/148977","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sdcverifier.com\/es\/wp-json\/wp\/v2\/whats_new"}],"about":[{"href":"https:\/\/sdcverifier.com\/es\/wp-json\/wp\/v2\/types\/whats_new"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/sdcverifier.com\/es\/wp-json\/wp\/v2\/media\/148931"}],"wp:attachment":[{"href":"https:\/\/sdcverifier.com\/es\/wp-json\/wp\/v2\/media?parent=148977"}],"wp:term":[{"taxonomy":"versions","embeddable":true,"href":"https:\/\/sdcverifier.com\/es\/wp-json\/wp\/v2\/versions?post=148977"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}