Train Your Engineering Team to Master SDC Verifier

For new and experienced users alike

From buckling and fatigue to weld checks and optimization — give your team the skills to run code-compliant verification directly inside Ansys, FEMAP, Simcenter 3D, or the standalone SDC Verifier interface. Live. Practical. No theory-only sessions.

Shared Training Philosophy

Practical. Focused. Built for Engineering Teams.

We don’t do slideshows. These sessions are live, interactive, and led by engineers who use SDC Verifier daily on real projects.

What to expect:

  • Full immersion — every session is live, practical, and focused on application.
  • Taught by engineers who use SDC Verifier in real projects
  • Real use cases, based on actual models and industry standards
  • No filler — every module solves a specific structural challenge

The goal is simple: equip your team with the skills to verify models, generate reports, and meet code requirements — efficiently, accurately, and either inside the tool they already use or in the modern SDC Verifier interface powered by NX Nastran.

Training Agenda: Core Modules

4 days. 4 hours per day. No wasted time. Each session focuses on building specific, repeatable skills your team will use right away.

  SDC Verifier

Day 1

• Introduction to SDC Verifier and how it integrates with your FEA tool

• Starting a verification project from scratch

• Using Report Designer to build clear, standard-compliant documentation

Day 2

• Plate buckling checks (with setup, evaluation, and interpretation)

• Fatigue checks across various loading scenarios

Day 3

• Beam member checks with real geometry

• Joint verification workflows, including connections and stiffeners

Day 4

• Bolt and weld strength checks

• Optimization tools to reduce weight and material use

• Live Q&A session — bring your project questions

Training Formats

Online Group Training

For small teams or individual engineers

Delivered on a fixed schedule (4 sessions × 4 hours)
Live format with real-time Q&A and guided exercises
Ideal for getting started or building foundational skills
Temporary SDC Verifier license provided, if needed

On-Site / Custom Team Training

For companies training larger teams or working on specific projects

Delivered at your office or training facility
Agenda tailored to your industry, standards, and models
Can focus on offshore, civil, mechanical, or shipbuilding use cases
Available worldwide, led by experienced SDC engineers

Software-Specific Training Tracks

  SDC Verifier

SDC Verifier (Standalone) — Training Details

Ideal for teams using SDC Verifier outside of an FEA tool.

  • Build full verification workflows directly in the SDC interface
  • Import models, set up checks, and generate documentation
  • Full access to buckling, fatigue, beam, joint, bolt, and weld tools
  • Suitable for cross-platform or non-integrated use cases

Includes: Step-by-step project setup, full Report Designer training, and standard-specific examples.

SDC for Ansys Mechanical — Training Details

Train your team to run full code checks inside Ansys.

  • Set up verification directly on Ansys models
  • Handle mapping, loads, and boundary conditions correctly
  • Build reports using the native Ansys mesh
  • Use fatigue, weld, bolt, and buckling checks without leaving the interface

Includes: Real examples, troubleshooting workflows, and report automation for Ansys users.

SDC for FEMAP — Training Details

Focused on engineers using FEMAP for structural simulation.

  • Full model verification without model export
  • Consistent checks across beam, plate, and joint elements
  • Visualize stress, buckling, and fatigue with verified standards
  • Build documentation with the Report Designer inside FEMAP

Includes: Real FEMAP models, fatigue evaluations, and setup best practices.

SDC for Simcenter 3D — Training Details

Built for simulation teams working in Simcenter 3D.

  • Code verification integrated directly into Simcenter
  • Plate buckling, joint analysis, fatigue, and weld checks
  • Use SDC tools without changing your modeling approach
  • Automated report generation using Simcenter data

Includes: Fatigue checks on real Simcenter loads, weld evaluation, and optimization workflows.

Frequently Asked Questions

Do we need prior experience with SDC Verifier to attend?

No. Your team should be comfortable with FEA software, but we cover SDC Verifier from the ground up.

Will sessions be recorded?

Yes. All training sessions will be recorded and shared with your team.

Can we include our own models or projects?

Yes, in private team trainings. We can walk through your use cases directly during the session.

How many engineers can join from our team?

For group sessions, we recommend up to 10 participants per session to keep it interactive. Larger groups can be split across multiple slots.

Do participants get certificates?

Yes — each engineer receives a certificate of completion and a LinkedIn-ready training badge.

Still have questions?

Write to us

Join our newsletter

    What would you like to know more about SDC Verifier?
    Loading