Ansys Apps

SDC Verifier is a fully integrated application in ANSYS Workbench which automates verification of structures in accordance with different industries design and safety standards.

In addition to full program, SDC Verifier provides separate Workbench plugins for dedicated checks: beam members and joint checks, plate and stiffened panel buckling, fatigue and code specific checks as Eurocode 3, AISC and FKM. With the addin programs you only install what you need. See the list of all available modules below.

Eurocode3 Beam Member App

This app automatically finds all beam members and all joints (including the buckling lengths) and checks all members according to Eurocode3 Beam Buckling module enables code checking in Ansys Mechanical according to Eurocode3 (EN1993-1-1, 2005). The SDC reporting app is included for free!

AISC beam member check App

This app automatically finds all beam members and all joints (including the buckling lengths) enables code checking in Ansys Mechanical according to AISC 1989 (required by law for rigs in the gulf) and the newer 360-10 (2010). The SDC reporting app is included for free!

Beam Member check App

This app automatically finds all beam members (including the buckling lengths) and checks all members according to AISC ASD 1989 and 2010, API 2A-RP WSD and LRFD, ISO19902, Eurocode 3 and Norsok N004. The SDC reporting app is included for free!

Beam Member and Joint Checks App

This app automatically finds all beam members and all joints (including the buckling lengths) and checks all joints and members according to AISC ASD 1989 and 2010, API 2A-RP WSD and LRFD, ISO19902, Eurocode 3 and Norsok N004. The SDC reporting app is included for free!

Weld Strength App

The weld strength module recognizes all your welds and checks the welds according to Eurocode3 (EN1993-1-8), DNV-OS-C101 and DNV-OS-C201 standards. Welds properties of full penetration (FP), Partial penetration (PP) and Fillet welds can be directly set to the welds and do not need to be modeled. The SDC reporting app is included for free!

Plate & Stiffener Buckling App

This app recognizes all the panels, plates, stiffeners and all related properties (length, width, effective width, etc.) automatically. Each plate and each stiffened panel is checked according to DNV CN30 (1995) , DNV RP-C201 (2010), ABS 2004 and 2014 standards. The SDC reporting app is included for free!

Fatigue App

The Fatigue Module enables code checking in Ansys Mechanical according to Eurocode3 (EN1993-1-1), DNV-RP-C203, FEM 1.001, EN13001 and DIN 15018 standards. All your welds are recognized and stresses are transformed in the weld direction automatically. FAT classes can be quickly set, by properties, materials, weld direction and type of weld with an updating component selector. The SDC reporting app is included for free!

SDC Reporting and SPDM App

The SDC Verifier and reporting application enables advanced report generation for Ansys Mechanical. Detailed description of the model setup and results are automatically generated into Microsoft Word document or PDF. Updating your report after changing the model only requires a single click!