Get Started

SDC Verifier: Get Started Tutorial

An introduction tutorial to get familiar with the software. It demonstrates how to create a project, define loads and load combinations, and quickly generate calculation results report. This step-by-step tutorial is designed to get you started with main SDC Verifier¬†features: Launch SDC Verifier; Creating new project; Create Combinations and Envelope; […]

Report Designer

Report Designer is an advanced tool to create fully customisable reports with control over the structure and possibility to modify and regenerate a part of the report.

Eurocode3 Fatigue

Fatigue check according to the Eurocode3 and FEM 1.001 standards is performed. Welds are automatically recognized by the Weld Finder. This step-by-step tutorial demonstrates how to implement the fatigue check according F.E.M. 1.001 in SDC Verifier. The following steps are covered: FEM 1.001 Fatigue detailed review; Implementation in SDC Verifier; […]

API ISO Norsok

API ISO Norsok Tutorial

A tubular offshore steel structure is verified according to the API RP-2A LRFD, ISO19902 and Norsok N004 standards. The buckling length is recognized automatically. In this tutorial, API 2A RP Beam Design Checks are reviewed in details. A beam model of a steel frame has been used as a start […]

AISC 360-10

The tutorial illustrates how to check Beam Buckling according to the AISC 360-10. A beam model of a lattice structure has been used as a start FEM model. In this tutorial, AISC 360-10 Beam Design Checks are reviewed in details. A beam model structure has been used as a start […]

Plate Buckling DNV

Plate Buckling DNV Tutorial

Plate Buckling check according to DNV RP-C201 2010 is performed on a part of the ship. Plates with dimensions are recognized automatically with help of the Panel Finder tool. In this tutorial an DNV 2010 Plate Buckling Check is reviewed in details. A part of a plate model of the […]

Plate Buckling ABS

Plate Buckling check according to the ABS 2014 is performed on a part of the ship. The plates with dimensions are recognized automatically with the help of the Panel Finder tool. In this tutorial an ABS 2014 Plate Buckling Check is reviewed in details. A part of a plate model […]