SDC Verifier

Individual Load

For job type Individual Loads = Steps: Individual Load is equal to one step result.

To edit title, description or safety factor, select individual load in the navigation tree:

For job type Load Sets = Steps: Individual Load is Load Component (X, Y, Z or Pressure). They are used in Load Sets with factors (from tabular data from Ansys Mechanical). One Load Set = one step.

In this type of job it is not possible to modify individual loads.

To preview a list of individual loads click on Individual Loads in the navigation tree. The list of Individual Loads and correspondent loads from Ansys Mechanical will be displayed:

Safety Factors

Safety Factor is used in the calculation according to the standards. E.g. DIN15018 standard, calculation of allowable stress:

To change multiple safety factors execute Individual Loads - Safety Factors...

Set Safety Factor value and press Set to selected button. Factors will be changed for the selected loads in the list. Press OK to apply the changes.