Structural Verification Software
for Energy Sector

SDC Verifier performs fatigue, buckling, and weld checks against 15+ energy standards (DNV, API, ABS, ISO, LR, BV) and produces audit-ready reports.

Offshore, Oil & Gas, and Renewable standards supported (DNV, API, ABS, ISO, etc.)

Energy engineers and analysts already trained on SDC Verifier

Reduction in manual prep with weld, plate, and joint recognition

Faster model processing with advanced automation tools

Industries

Offshore

Meet the requirements for offshore platforms in harsh environments.

Structures
- Jack-up Rigs
- Mooring Systems
- SFloating LNG Terminals
- FPSOs (Floating Production Storage and Offloading units)
Components
- Manifolds
- Templates
- Subsea Wellheads

Oil & Gas

SDC Verifier evaluates storage tanks, pipelines, and pressure vessels, optimizing designs for ASME, API, and other standards.

Structures
- Storage Tanks
- Pressure Vessels
- Oil Rigs
- Flare Stacks
- FPSOs (+1)
Components
- Derricks
- masts
- distillation columns
- reactors
- fractionation towers

Renewable Energy

SDC Verifier optimizes wind turbines, solar farms, and offshore platforms for extended lifespan.

Structures
- Grid Infrastructure
- Wind Turbine Towers
- Offshore Wind Farm
- Solar Panel Mounting Structures
- Geothermal Power Plants
Components
- Towers
- blades
- storage tanks
- collectors
- tension legs (+3)

How SDC Verifier Powers Energy Projects

Automatic Recognition for Energy Structures

Detects plates, welds, joints, and bolts in complex offshore rigs, wind turbines, or vessels in seconds.

Fatigue, Buckling & Weld Checks in One Software

Cover critical failure modes in turbines, pipelines, FPSOs, and pressure vessels with a single workflow.

Certification-Ready Verification

Pre-built checks for DNV, ABS, API, ISO, EN 13001, and more — accepted by classification societies worldwide.

Automated Reporting for Compliance

Generate audit-ready documents linking every result to the governing standard.

Seamless Integration with Leading Platforms

Explore Standalone Solution

Explore Integration Options

SDC Verifier runs directly inside the FEA software your engineers already use — no switching tools, no duplicate modeling. Each extension is optimized for structural verification in energy projects.

SDC Verifier

Built for Energy projects. Run code checks and create reports without rebuilding the model.

Works with your FEA: import from Ansys, Femap, Simcenter 3D.
Key checks: fatigue, buckling, welds, bolts.
Standards: API, DNV, Eurocode, EN 13001, ISO/NORSOK, and more.
Reports for review: clause-referenced, ready to share.

SDC for Ansys Mechanical

Built for Energy Sector Simulation

Run fatigue, buckling, weld, and bolt checks inside Ansys
No exports, no workarounds
Supports API, DNV, Eurocode, EN 13001, and more

SDC for Femap

Streamlined for Offshore & Mechanical Workflows

Model recognition tools built for jacket structures, cranes, piping
Full code check automation with report generator
Supports DNV RP-C201, ISO 19902, AISC 360-10

SDC for Simcenter 3D

Purpose-Built for Complex Offshore Systems

Verify welds, joints, and beam members in-place
Classification-compliant checks for floating structures
Plate buckling, fatigue, joint efficiency — all automated

Supported Standards for Energy Structures

DNV Standards

DNV RP-C203 (2016)

2016

DNV RP-C203 (2024)

2024

DNV CN30 Plate Buckling (1995)

1995

DNV RP-C201 Plate/Stiffener Buckling (2010)

2010

DNV CG-0128 Plate Buckling (2015)

2015

DNV CG-0128 Plate Buckling (2023)

2023

DNV OS-C101-LRFD Weld Strength (2011)

2011

DNV OS-C101-LRFD Weld Strength (2024)

2024

DNV OS-C201-WSD Weld Strength (2011)

2011

DNV OS-C101-WSD Weld Strength (2024)

2024

DNV RP C-202 Curved Plate Buckling (2019)

2019

DNVGL ST-0126 (2016)

2016

API Standards

API RP 2A-LRFD (1st, 1993)

1993

API RP 2A-WSD (21st, 2007)

2007

ABS Standards

ABS 2004 Guide – Buckling and Ultimate Strength

2004

ABS OS Plate Buckling (2022)

2022

ABS FPI Plate Buckling (2014)

2014

ABS FPI Plate Buckling (2024)

2024

ISO

ISO 19902 (1st, 2007)

2007

ISO 19902 (2nd, 2020)

2020

AISC Standards

AISC ASD (9th, 1989)

1989

AISC 360-10 Members (14th, 2010)

2010

AISC 360-10 Bolts (14th, 2010)

2010

AISC 360-22 Members (2022)

2022

ASME Standards

ASME VIII (Div 2, 2010)

2010

ASME B31.8 (2018)

2018

British Standards

BS 7608 Fatigue (2014)

2014

Used and Certified by Industry Leaders

Case Success

CESAC

Spain | Industry: Marine & Offshore Engineering

Using SDC Verifier, CESAC delivered a BV NR467 verification of the LNG tank saddles and double-bottom structure on Spain’s first LNG bunkering vessel.

100%

Compliance BV NR467 (ULS/ALS)

4×

Finer mesh in critical zones

0

Rework at class review

Cosimtec Pte Ltd

Singapore | Industry: Offshore Engineering

With SDC Verifier, we streamlined tedious tasks like code checks and report preparation, saving over 70% on report generation. The Free Edge tool ensured a fully connected mesh, and automated workflows reduced project time by 20–30%, even with 8 complex load cases and over 650,000 elements. — Mihir Jha, Director Cosimtec Pte Ltd

70%

Time saved on report generation

60%

Faster buckling checks

30%

Reduction in total project time

Bluewater Energy Services B.V.

Netherlands | Industry: Offshore Oil & Gas

Using ANSYS Workbench and SDC Verifier, we handled over 300 load combinations, verified both beam and shell elements, and ensured structural integrity of one of the heaviest modules on board. It was critical for lifetime extension under DNV rules.

300+ load combinations for ULS, blast, heel & fatigue

Verified P20 module under DNV-OS-C101/C102 and RP-C201

Combined shell and beam modeling using ANSYS + SDC Verifier

Allseas

Switzerland | Industry: Offshore Construction

22 models. 22 load conditions. 4000+ pages of code-check reports generated in 2 days. Weeks, if not months, saved.

4000+

pages of reporting auto-generated with SDC Verifier

2

days to process yield and buckling checks across 22 FEM models

Analysis performed on the largest construction vessel in the world

AKKA Technologies

France | Industry: Engineering Consultancy

SDC saves a lot of time on buckling analysis, and reduces errors compared to .xls checks, — Stéphanie Lechat, Team Leader, AKKA

Automated plate detection with Panel Finder

Significant time savings over manual spreadsheet checks

Reduced error rate in plate buckling verification

RABLE

Netherlands | Industry: Solar Tech & Engineering

With SDC Verifier, we engineered lightweight frames for weak industrial roofs — cutting weight by up to 50% while ensuring safety and compliance.

Optimized structural layouts across 6 frame configurations

Combined beam + plate models for local + global analysis

Up to 25 kg/m² weight reduction vs. conventional systems

IGN Ingenieurgemeinschaft Nord

Germany | Industry: Offshore Energy

An essential tool for any project requiring detailed strength assessments. SDC Verifier cut our fatigue and weld verification time significantly, — Hilmar Jackwerth, Structural Engineer

Verified to DIN EN 1993-1-1, DNV RP-C201, and NORSOK N-004

Member, plate, and weld checks completed in one automated workflow

50% faster strength verification vs. manual calculations

Bring Verification Closer to Reality

Get a Guided Demo

Walk through your challenges with an engineer — see how SDC Verifier fits your workflow.

Request a Demo

Run It on Your Model

Upload your model and explore the results — fatigue, buckling, welds, bolts, and more.

Start Free Trial

Structural Verification Software for Energy Sector

Industries

Offshore

Oil & Gas

Renewable Energy

How SDC Verifier Powers Energy Projects

Automatic Recognition for Energy Structures

Fatigue, Buckling & Weld Checks in One Software

Certification-Ready Verification

Automated Reporting for Compliance

Seamless Integration with Leading Platforms

SDC Verifier

SDC for Ansys Mechanical

SDC for Femap

SDC for Simcenter 3D

Supported Standards for Energy Structures

Case Success

CESAC

100%

4×

0

Cosimtec Pte Ltd

70%

60%

30%

Bluewater Energy Services B.V.

Allseas

4000+

2

AKKA Technologies

RABLE

IGN Ingenieurgemeinschaft Nord

Bring Verification Closer to Reality

Get a Guided Demo

Run It on Your Model

Join our newsletter

Structural Verification Software
for Energy Sector