An introduction tutorial to get familiar with the software. It demonstrates how to create a project, define loads and load combinations, and quickly generate calculation results report.
Plate Buckling check according to DNV RP-C201 2010 is performed on a part of the ship. Plates with dimensions are recognized automatically with help of the Panel Finder tool.
The tutorial demonstrates how to prepare full calculation report using Report Wizard. Model description, plots, and various tables are explained in details.
Report Designer is an advanced tool to create fully customisable reports with control over the structure and possibility to modify and regenerate a part of the report.
A tubular offshore steel structure is verified according to the API RP-2A LRFD, ISO19902 and Norsok N004 standards. The buckling length is recognized automatically.
Plate Buckling check according to the ABS 2014 is performed on a part of the ship. The plates with dimensions are recognized automatically with the help of the Panel Finder tool.
Joint Check is a part of the API RP-2A LRFD standard which verifies the strength of tubular construction of tension or compression members. Joints and brace classification are recognized automatically.
The tutorial illustrates how to check Beam Buckling according to the AISC 360-10. A beam model of a container crane has been used as a start FEM model.
Fatigue check according to the F.E.M 1.001 standard is performed. Welds are automatically recognized by the Weld Finder. Classification is defined for different directions.
A part of the gantry crane structure with bolted connection detail has been verified with Axial and Shear Bolt checks implemented as custom checks.